Description

Stjärnagloss Skära:

Skära Gloss Enhancing Polish is a versatile formula designed to clean, nourish and protect high-gloss paintwork. With fine micro-abrasive particles, it removes light paint imperfections, while nourishing ingredients improve depth and gloss. This polish, with added synthetic components for protection, is suitable for both manual and machine use. Ideal for preparing paintwork for new wax or sealant, but not suitable for matte or satin finishes. For regular maintenance, Skära is the perfect pre-wax polish.

How do I use Stjärnagloss Skära?

Manual:

• Preparation: Ensure a clean surface by claying the surface if necessary clay.
• WARNING: Shake the polish before use.
• Application: Apply a small amount of polish to an applicator pad.
• Application: Dab the pad onto the panel and make circulating motions with medium pressure.
• Inspection: Check the result and remove any excess product with a soft polishing cloth. Also ensure correct lighting during inspection.
• Finish: remove polish residue and, if necessary, protect the surface with a wax or paint sealer.

Machine:

• Preparation: Ensure a clean surface by claying the surface if necessary clay.
• WARNING: Shake the polish before use.
• Application: Apply the polish to the pad with four small dots, top, bottom, left and right.
• Polishing: Dab the pad on the panel, start the machine and gradually increase the speed.
• RPM: Increase the RPM and move from left to right and top to bottom on a 30 by 30 cm panel.
• Inspection: Check the result and remove any excess product with a soft polishing cloth. Also ensure correct lighting during inspection.
• Finish: remove polish residue and, if necessary, protect the surface with a wax or paint sealer.

Features Stjärnagloss Skära:

• Cleans, nourishes and protects high-gloss paintwork.
• Removes slight imperfections.
• Suitable for manual or machine use.
• Not suitable for matte finishes.
• Ideal pre-wax polish for regular maintenance.

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information