Description

Filling valve 10-20L:

The drain valve is the perfect addition to your water bottles. Thanks to this clever drain valve, you can easily refill your spray bottles without waste.

How do I use Filling Valve 10-20L?

• Make sure you have prepared the proper water bottle, such as a Kenotek 20L or Koch Chemie water bottle with a 10/20-liter cap, and that the filler valve is in good condition.
• Place the filling valve firmly in the opening of the water bottle, making sure it is tightly sealed and airtight. This will prevent leaks during filling.
• Place the water bottle over the spray bottle into which you want to transfer the liquid. Make sure the spray bottle is clean and empty.
  Open the filling valve by turning or tilting the handle or operating lever, depending on the specific design of the valve.
• Let the liquid flow slowly and evenly into the spray bottle. The drip edge on the fill valve helps you accurately dispense the liquid without spilling.
• Once the desired amount of liquid has been transferred, close the filling valve by turning the handle or operating lever back or tilting it to the closed position.

Features Filling valve 20L:

• Filling opening : DIN61.
• Airtight sealable
• Universally applicable
• Resistant to aggressive chemicals
• Drip edge for accurate dispensing.

Warnings:

• Overheating: Make sure that the filling valve and the liquids you transfer are not exposed to extreme heat or direct sunlight, as high temperatures can damage or deform the materials.
• Fluid expansion: Keep in mind that fluids can expand at high temperatures. Do not overfill containers, as expanding liquids can cause leakage or overflow.
• Storage: Store the filling valve and fluids in a cool, shaded place to prevent overheating. Make sure the storage area is well ventilated.
• Protection: Wear appropriate protective clothing, such as gloves and goggles, when handling aggressive chemicals, especially in hot conditions.
• Check for leaks: Regularly monitor the seal and connections of the filling valve, especially in hot weather, to ensure that no leaks occur.
• Beware of evaporation: Some liquids may evaporate at high temperatures. Make sure containers are tightly sealed to minimize evaporation and prevent product loss.

Please note the following general instructions:

• Check that the surface is cool.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information