Description

Carbon Collective Hybrid Shampoo:

Carbon Collective Ceramic Shampoo Hybrid SiO2 is a smooth, pH-neutral shampoo formulated to leave durable SiO2 protection on protected and unprotected finishes, and improve gloss, beading and hydrophobic behavior.
Originally formulated to thoroughly clean ceramic-coated coatings, our Hybrid Shampoo leaves an additional layer of protection on the surface, extending the life of your ceramic coating.

How do I use Carbon Collective Hybrid Shampoo?

1. Wash the car according to the two bucket method including dirt grid.
2. Take Hybrid Shampoo and add 50 ml to one bucket, then fill with water.
3. Fill the other bucket with clean water without product.
4. Dip the Carbon Collective Wash Mitt into the bucket of soapy water and thoroughly clean the surface.
5. Divide the car into three sections: top, middle and bottom. Clean from top to bottom in a spiral motion.
6. With each wipe, dip the wash mitt into the bucket of water to leave dirt behind.
7. Dip your wash mitt into the bucket of soapy water again and continue the cleaning process according to these steps until the car is completely cleaned.
8. Rinse the vehicle thoroughly with clean water to remove all residual shampoo and dirt and reveal a perfect shine.
9. Optional: Apply a straight line of pure product to the wash mitt without re-dipping into the bucket for better water repellency.
10. Rub the clean car again with the pure product on the washmitt.
11. Rinse the vehicle thoroughly with clean water to remove all shampoo residue and create better water repellency.
12. Dry the vehicle with a microfiber drying towel and/or car dry blower.

Features Carbon Collective Hybrid Shampoo:

• Smooth pH neutral formula
• Cherry Fragrance
• Leaves SiO2 protection on unprotected vehicles
• Restores and strengthens ceramic-coated finishes
• Clean and protect in one easy step
• Deep cleaning - removes trapped dirt from protected finishes
• High concentration - only 50 ml needed per 20-liter bucket
• Leaves a high-gloss, streak-free and water-repellent finish

Please note the following general instructions:

• Check that the surface is cool.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information