Description

Carbon Collective KL!N Zero Finish:

The Zero Finish microfiber cloth is the perfect choice for removing excess ceramic coating, polishing residue, or for applying spray sealants and spray coatings to your vehicle.
This means less effort, faster application and an improved workflow.
KLiN Korea's high quality standards, well-known in the nuclear industry, speak for the credibility of these microfiber cloths for automotive applications.
Each cloth is carefully packed in the Contaminant Control System (CCS™) to prevent impurities and is pre-washed and air-dried before shipping.

How do I use Carbon Collective KL!N Zero Finish?

For Application Coatings: 

1. Wear nitrile gloves and a mouth mask when applying coating.
2. When removing coatings, it is advisable to use multiple cloths and ensure proper lighting.
3. Take four coating cloths.
4. Cut the corners of each cloth to identify them (cloth 1, cloth 2, etc.).
5. Start with cloth 1, which has one cut corner, and use it to remove the coating from the surface.
6. Continue with cloth 2, 3 and 4, each time increasing the area to be treated.
7. Use straight and/or circular motions with minimal pressure to absorb the coating evenly into the cloth.
8. Repeat this application with a new cloth until the coating is completely absorbed and no more "High Spots" are visible.
9. Apply coating to a new 30 by 30 cm area and repeat the previous steps.
10. Once the coating has been applied to the car, perform a final inspection to ensure that no "High Spots" have been left behind.

For application Quick Detailers, Sealants, Wax:

1. Maintain a clean vehicle surface.
2. Apply product evenly to a section of the vehicle.
3. Rub the panel with the microfiber cloth to remove excess product and achieve a glossy finish.
4. Repeat the above steps for other parts of the vehicle.
5. Cloth maintenance is described at the bottom of this page.

Warnings:

• The coating continues to harden in the microfiber cloths even if you put them directly into the washing machine.
• Discard used cloths for coating to avoid damage.
• Avoid application in direct sunlight or on warm surfaces.
• Use suede applicators once and throw them away after use.
• Wear nitrile gloves whileapplying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

Features Carbon Collective KL!N Zero Finish:

• Lint-free and Lasered Edges: For flawless application without lint and with durability.
• High Absorption: Weighs 406 g/m² for effective absorption of products, dirt and dust.
• Versatile Use: Suitable for both dry and wet use, adapts to different applications.
• Handy Size: With dimensions of 40 x 40 cm for optimal handiness and performance.

Maintenance Carbon Collective KL!N Zero Finish:

• Washing temperature: Maximum 40°C (104°F).
• Optimal Detergent: Carbon Collective Restore KL!N Approved
• General detergent: Liquid and non-organic
• Avoid fabric softeners, organic detergents and bleaches, as they can coat microfibers and reduce performance.

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information