Description

Carbon Collective Oracle 3.5h Inorganic:

Oracle Inorganic Ceramic Coating is one of the most advanced coatings we have ever created, with ultra-hydrophobic properties and unparalleled gloss enhancement.
It's also one of the most diverse coatings on the market, enhancing the depth of satin and matte finishes while being safe to use on a wide variety of surfaces, including: paint, PPF, vinyl film, gelcoat, carbon fiber, exposed metal, aluminum and stainless steel surfaces, plastic grilles, trim and headlights.
With Oracle, you can spend more time driving and less time cleaning, creating a highly repellent coating on the surface that is extremely low maintenance, waxing or reapplication is no longer necessary.

How do I use Carbon Collective Oracle 3.5h Inorganic?

• Apply the coating to a prepared, clayed and polished surface for optimum adhesion.
• Before applying the coating, degrease the car twice with Panel Prep Cleanser, so that the pores are cleaned and the coating can adhere properly.
• Wear nitrile gloves and a ventilation mask.
• Moisten the coating applicator with 8-10 drops.
• Apply in overlapping horizontal and vertical strokes, up to 30 x 30 cm at a time.
• If necessary, re-moisten the applicator with a few drops of coating.
• Allow to evaporate for up to 1-2 minutes; remove excess product within this time.
• Remove excess product with 3-4 coating cloths and rub thoroughly for proper application.
• When applying a second coat, use a new coating applicator and 3-4 new cloths.
• For a guaranteed lifespan of 2 years, we recommend applying a second application coat.
• Simply follow the same steps as described earlier.
• When the application is complete check carefully with an inspection lamp to work out any highspots.
• Allow the coating to cure for 8 hours or speed up the process with an infrared lamp for 10 minutes before exposing it to the elements.
• After application, leave the car untouched in terms of physical cleaning for the next 2 weeks so that the coating has sufficient time to fully cure.
• Bring Carbon Collective Special to every three washes to preserve the coating and extend its life.

Warnings:

• Avoid application in direct sunlight or on warm surfaces.
• Use suede applicators once and throw them away after use.
• Do not reuse the microfiber cloths you used to remove the coating.
• Wear nitrile gloves while applying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

On what surfaces can I use Carbon Collective Oracle 3.5h Inorganic?

• Matte finishes
• Satin finishes
• Glossy finishes
• Powder coated
• Vinyl & PPF

Features Carbon Collective Oracle 3.5h Inorganic:

• Enhances glossy, matte and satin finishes
• 3.5H hardness
• Can be kept for at least 2-3 years
• Lasts 3 years when combined with Platinum Paint (as a base)
• High chemical resistance
• Ultra water repellent
• Makes the surface easier to maintain
• Water repellent angle of 110º
• Drain angle as low as 17º
• Longer working time (2-3 minutes for removal)

Contents Carbon Collective Oracle 3.5h Inorganic:

• Coating certificate holographic door sticker
• 30 ml bottle of Oracle Inorganic Ceramic Coating
• 2x 75 mm microfiber applicators
• Foil packaging with instructions

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information