Description

Diamond Protech - Diamond Interior - Vinyl, Plastic & Trim Restorer Kit:

Diamond Protech, a Swiss company specializing in the development of coatings for satellites in space, has successfully transferred its extensive knowledge and experience to the automotive industry.

This resulted in the creation of Diamond Interior, With proper preparation, Diamond Interior provides up to 12 months of protection.

What makes these coatings special is that they require no curing time and are ready for exposure to the weather elements as early as 30 minutes of application.

How do I use Diamond Protech - Diamond Interior - Vinyl, Plastic & Trim Restorer Kit?

1. Before applying the coating, degrease the panels with Diamond Body Prep, so that the pores are cleaned and the coating can adhere properly.
2. Wear nitrile gloves and a ventilation mask.
3. Shake the product vigorously for 15 seconds before use with the built-in shake beads (making noise is normal).
4. Moisten the coating applicator with 15 drops.
5. Moisten a small panel in horizontal and vertical movements.
6. Remove excess product with 1-2 coating cloths and rub thoroughly for proper application.
7. When the application is complete check carefully with an inspection lamp to work out any highspots.
8. Allow the coating to cure for 30 minutes before exposing it to the elements.

Warnings:

• IMPORTANT: Diamond Protech products are specifically formulated to be used only in conjunction with the brand's degreaser.
• Apply the coating only in an enclosed area at a temperature between 10 and 30°C, with humidity not exceeding 70%
• Avoid application in direct sunlight or on warm surfaces.
• Use applicators once and throw them away after use.
• Do not reuse the microfiber cloths you used to remove the coating.
• Wear nitrile gloves while applying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

Features Diamond Protech - Diamond Interior - Vinyl, Plastic & Trim Restorer Kit:

• Diamond Interior: Space-tested coating developed with satellite coating expertise
• Resistant to extreme hot/cold temperatures.
• Manufactured in our own laboratory in Switzerland.
• Coating based on Perhydropolysilazane (PHPS) or Inorganic Polysilazane IOTA-PHPS
• No curing time; after 30 minutes the coating is ready for exposure to the weather elements.
• 12 months of hydrophobic interior protection
• Effortless, single-layer application
• Diamond hard scratch resistance
• 50ml

Contents Diamond Protech - Diamond Interior Kit:

• 1 x Diamond Interior 50ml
• 1 x Diamond Body Prep 100ml + Sprayer
• 1 x Applicator
• 1 x Microfiber towel
• 1 x Gloves

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information