Description

Carbon Collective Platinum Paint 7h + Oracle Ceramic Coating:

Platinum Paint Ceramic Coating embodies the future of paint protection. This unique paint coating creates a permanent bond directly to the paint surface, making it the active top coat. Enjoy up to two years of protection from Fallout, bird droppings, tar, chemicals, UV rays and even minor scratches. This coating, with a 7H hardness, serves not only as protection but also as a base for Oracle coating, creating a scratch-resistant layer and keeping your paint swirl-free. Unlike ordinary waxes, this sealant features anti-static and self-cleaning properties, minimizing maintenance. No need for repeated application or collaboration with wax or detailer - this is all your paintwork needs for long-lasting protection and a lasting shine.

How do I use Carbon Collective Platinum Paint 7h + Oracle Ceramic Coating?

1. Apply the coating to a prepared, clayed and polished surface for optimum adhesion.
2. Before applying the coating, degrease the car twice with Panel Prep Cleanser, so that the pores are cleaned and the coating can adhere properly.
3. Wear nitrile gloves and a ventilation mask.
4. Moisten the coating applicator with 8-10 drops of Platinum Paint.
5. Apply in overlapping horizontal and vertical strokes, up to 30 x 30 cm at a time.
6. If necessary, re-moisten the applicator with a few drops of coating.
7. Allow it to evaporate (flash off) for up to 1-2 minutes; remove excess product within this time.
8. Remove excess product with 3-4 coating cloths and rub thoroughly for proper application.
9. When applying a second coat, use a new coating applicator and 3-4 new cloths.
10. For a guaranteed life of 3-4 years, we recommend applying a second application coat of Platinum Paint followed by a top coat of Oracle (i.e. a total of 3 coats), with a waiting time of about 1-2 hours between each coat.
11. Simply follow the same steps as previously described to apply the top coat Oracle with a new applicator and coating cloths.
12. When the application is complete check carefully with an inspection lamp to work out any highspots.
13. Allow the coating to cure for 8 hours or speed up the process with an infrared lamp for 10 minutes before exposing it to the elements.
14. After application, leave the car untouched in terms of physical cleaning for the next 2 weeks so that the coating has sufficient time to fully cure.
15. Maintenance: Apply Carbon Collective Special to every three washes to preserve the coating and extend its life.

Warnings:

• Avoid application in direct sunlight or on warm surfaces.
• Use suede applicators once and throw them away after use.
• Do not reuse the microfiber cloths you used to remove the coating.
• Wear nitrile gloves while applying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

On what surfaces can I use Carbon Collective Platinum Paint + Oracle?

• Matte finishes
• Satin finishes
• Glossy finishes
• Powder coated
• Vinyl & PPF
• Gelcoat

Features Carbon Collective Platinum Paint:

• Enhances glossy, matte and satin finishes
• Durability and scratch resistance:
• True 7H hardness
• Minimum shelf life of 2 years
• Lasts 3 years when combined with Oracle
• High chemical resistance

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information