Description

Carbon Collective Rapide High Gloss Quick Detailer:

Rapide Quick Detailer provides maximum shine with minimal effort. The super-smooth, streak-free formula works on virtually any paint surface, removes water spots and dust in one swipe, and adds shine and brightness for that perfect "just detailed" result. Rapide is the perfect finishing touch; our spray & wipe formula enhances the finish on paint, glass and plastic and anchors all your hard work. Designed to be applied in layers, our quick detailer is compatible with our Ceramic Coatings and Sealants to increase durability and achieve the highest shine. Can be used on wet or dry surfaces and as a drying aid even in the sun or on hot surfaces without streaking. One coat provides approximately 3-4 weeks of protection. Perfect finishing touch for a "just detailed" result. Smells like a blissful candy scent.

How do I use Carbon Collective Rapide High Gloss Quick Detailer?

Wet drying aid application:

1. Prepare a cleaned surface that has just been washed and is still wet.
2. Shake well before use.
3. Apply a few sprays of Carbon Collective Detailer to a soft microfiber cloth for small areas or the Carbon Collective EVO Drying Cloth for large surfaces.
4. Place the cloth on the wet surface, pull it toward you and lift it to dry a new part of the surface.
5. The cloth absorbs water very quickly, so make sure it does not touch the ground or other contaminated surfaces.
6. Repeat until the surface is completely dry for a streak-free finish.
7. If necessary, use several cloths depending on their GSM.
   (It gives an indication of the thickness and absorbency).
8. Keep the cloth in damp water after use to prevent drying aids or sealants from drying out.
9. Wash the cloth in the washing machine after each use.

Dry application:

1. Make sure the surface to be treated is clean, dry and dust-free.
2. Shake well before use.
3. Apply a few sprays of Carbon Collective Rapide to a soft microfiber cloth.
4. Optional : use the Speed Applicator to distribute the spray evenly over the surface.
5. Rub lightly in straight strokes to remove fingerprints and light contaminants and create a shiny, smooth finish.
6. Take several clean microfiber cloths and buff the treated surface to remove any excess Rapide Quick Detailer and leave a streak-free shine.
7. Repeat on other surfaces as needed.

Features Carbon Collective Rapide High Gloss Quick Detailer:

• Enhances shine and brightness
• Removes water stains
• Increases the pearl effect
• Leaves no streaks even when used in the sun.
• Provides a super smooth finish that helps prevent dirt adhesion
• Suitable for use on all exterior finishes
• Helps with spot-free drying as a drying aid

Please note the following general instructions:

• Check that the surface is cool.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information