Description

Carpro CQuartz UK 3.0:

CARPRO CQuartz UK 3.0 marks the advancement in ceramic coating! This glass coating is specifically designed to perform in a variety of climates, including the cooler and more humid conditions typical of Belgium and the Netherlands.

The ceramic coating delivers impressive resistance to chemicals, salt, acid rain and other external influences. With a high silica-quartz content, a hard, glass-like layer forms that results in a stunning shine. In addition, the glass coating is highly hydrophobic, meaning it repels water, dirt and oil. This makes car maintenance easier, thanks to its "self-cleaning" properties.

CarPro CQuartz CQ.UK 3.0 is based on the same technology as the original CQuartz, but with minor improvements in drying time and water repellency. This coating can be applied in any climate, with temperatures ranging from 3 to 40 degrees.

CQ.UK 3.0 consists of 70% pure SiO2, the highest concentration of silica at present. The more pure the SiO2, the brighter the coating. SiO2 is one of the hardest materials on earth and provides extreme dirt and water repellency. CarPro CQuartz CQ.UK 3.0 is now even easier to apply in any climate.

How do I use Carpro CQuartz UK 3.0?

1. Apply the coating to a prepared, clayed and polished surface for optimum adhesion.
2. Before applying the coating, degrease the car twice with Carpro Eraser, so that the pores are cleaned and the coating can adhere properly.
3. Wear nitrile gloves and a ventilation mask.
4. Moisten the coating applicator with 8-10 drops.
5. Apply in overlapping horizontal and vertical strokes, up to 30 x 30 cm at a time.
6. If necessary, re-moisten the applicator with a few drops of coating.
7. Allow it to evaporate(flash) for up to 1-2 minutes; remove excess product within this time.
8. Remove excess product with 3-4 coating cloths and rub thoroughly for proper application.
9. When applying a second coat, use a new coating applicator and 3-4 new cloths.
10. For a guaranteed lifespan of 5 years, we recommend applying a second application coat.
11. Simply follow the same steps as described earlier.
12. When the application is complete check carefully with an inspection lamp to work out any highspots.
13. Allow the coating to cure for 8 hours or speed up the process with an infrared lamp for 10 minutes before exposing it to the elements.
14. After application, leave the car untouched in terms of physical cleaning for the next 2 weeks so that the coating has sufficient time to fully cure.
15. Apply Carpro Reload 2.0 to every three washes to preserve the coating and extend its life.

Warnings:

• Avoid application in direct sunlight or on warm surfaces.
• Use suede applicators once and throw them away after use.
• Do not reuse the microfiber cloths you used to remove the coating.
• Wear nitrile gloves while applying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

On what surfaces can I use Carpro CQuartz UK 3.0?

• Gelcoat
• Matte finishes
• Satin finishes
• Glossy finishes

Features Carpro CQuartz UK 3.0:

• Easy to use and specially designed for use in all climates
• Extremely high SiO2 quartz content
• Deep shine that stays put
• Hydrophobic: water and dirt repellent
• Easy maintenance with "self-cleaning" properties
• Resistant to wax scratches, UV rays, excrement, salt, acid rain, high and low temperatures and more
• Lifespan up to 2 years (average 18-24 months)
• Average thickness: 1~2 microns per layer
• ±15 ml consumption per layer
• Water contact angle: 110°
• Recommended ambient temperature: 5-35°C

Contents Carpro CQuartz UK 3.0:

• 1 x CQuartz CQUK 30 ml, 50 ml or 100 ml
• 4 x microfiber suede applicator (10x10cm)
• 1 x microsuede cloth (40x40cm)
• 1 x foam block applicator
• 2 x CQuartz hologram sticker
• 1 x Reload Spray Sealant 100 ml (only with 30 ml and 50 ml kit package)

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information