Description

PURE:EST - P5 - Ceramic Coating - Gloss, Matte & PPF Surfaces:

Discover the updated PURE:EST P5 - now compatible with foil/wrap! Specially updated in 2022 for the launch of Jon Olsson's brand new boat, the C'est Normal 52R by Bernico. This ceramic paint protection offers not only unmatched protection against dirt and UV rays, but also an extraordinary water repellent property. The hydrophobic strength of PURE:EST P5 is arguably the best on the market. Enjoy long-lasting protection for up to three years or more, making maintaining your vehicle a breeze. For optimal results, combine with PURE:EST S1 shampoo for regular maintenance washes.

How do I use PURE:EST - P5 - Ceramic Coating - Gloss, Matte & PPF Surfaces?

1. Apply the coating to a prepared, clayed and polished surface for optimum adhesion.
2. Before applying the coating, degrease the car twice with IP Isopropanol, so that the pores are cleaned and the coating can adhere properly.
3. Wear nitrile gloves and a ventilation mask.
4. Moisten the coating applicator with 8-10 drops.
5. Apply in overlapping horizontal and vertical strokes, up to 30 x 30 cm at a time.
6. If necessary, re-moisten the applicator with a few drops of coating.
7. Allow it to evaporate(flash) for up to 1-2 minutes; remove excess product within this time.
8. Remove excess product with 3-4 coating cloths and rub thoroughly for proper application.
9. When applying a second coat, use a new coating applicator and 3-4 new cloths.
10. For a guaranteed life of +3 years, we recommend applying a second layer of application.
11. Simply follow the same steps as described earlier.
12. When the application is complete check carefully with an inspection lamp to work out any highspots.
13. Allow the coating to cure for 8 hours or speed up the process with an infrared lamp for 10 minutes before exposing it to the elements.
14. After application, leave the car untouched in terms of physical cleaning for the next 2 weeks so that the coating has sufficient time to fully cure.
15. Apply PURE:EST P2 Protection & Gloss to every three washes to preserve the coating and extend its life.

Warnings:

• Avoid application in direct sunlight or on warm surfaces.
• Use suede applicators once and throw them away after use.
• Do not reuse the microfiber cloths you used to remove the coating.
• Wear nitrile gloves while applying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

On what surfaces can I use PURE:EST - P5 - Ceramic Coating - Gloss, Matte & PPF Surfaces?

• Gelcoat
• Matte finishes
• Satin finishes
• Glossy finishes
• PPF & Vinyl Wrap finishes

Features Carbon Collective Molecule:

• Maximum scratch protection
• Extremely water repellent
• Super slick application
• Enhances glossy, matte and satin finishes
• Genuine 9H hardness
• Lifespan: 3+ years
• High chemical resistance
• Water repellent angle of 110º
• Drain angle as low as 17º

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information