Description
Kenotek COAT IT - Flexo - 50ml:
Experience the ultimate protection for your vehicle with Kenotek Coat It Flexo, a high-performance ceramic coating for hydro- and oleophobic treatments. With a solid 7H hardness, Flexo provides outstanding protection for your vehicle's paint. Enjoy excellent hydrophobic quality, with a water contact angle of over 105°.
Flexo not only ensures a smooth surface to minimize micro-scratches, but also offers a non-stick effect for long-lasting gloss. Enhanced water stain resistance and impressive water repellency ensure a flawless appearance even under challenging conditions.
With an 18-month life, when used correctly and regularly with our recommended aftercare products, Kenotek Coat It Flexo is the perfect choice for long-lasting paint protection. Discover the power of Flexo and give your vehicle the treatment it deserves.
How do I use Kenotek COAT IT - Flexo - 50ml?
- Apply the coating to a prepared, clayed and polished surface for optimum adhesion.
- Before applying the coating, degrease the car twice with Panel Prep Cleanser, so that the pores are cleaned and the coating can adhere properly.
- Wear nitrile gloves and a ventilation mask.
- Moisten the coating applicator with 8-10 drops.
- Apply in overlapping horizontal and vertical strokes, up to 30 x 30 cm at a time.
- If necessary, re-moisten the applicator with a few drops of coating.
- Allow it to evaporate(flash) for up to 1-2 minutes; remove excess product within this time.
- Remove excess product with 3-4 coating cloths and rub thoroughly for proper application.
- When applying a second coat, use a new coating applicator and 3-4 new cloths.
- For a guaranteed lifespan of 5 years, we recommend applying a second application coat.
- Simply follow the same steps as described earlier.
- When the application is complete check carefully with an inspection lamp to work out any highspots.
- Allow the coating to cure for 8 hours or speed up the process with an infrared lamp for 10 minutes before exposing it to the elements.
- After application, leave the car untouched in terms of physical cleaning for the next 2 weeks so that the coating has sufficient time to fully cure.
- Bring Carbon Collective Special to every three washes to preserve the coating and extend its life.
Warnings:
- Avoid application in direct sunlight or on warm surfaces.
- Use suede applicators once and throw them away after use.
- Do not reuse the microfiber cloths you used to remove the coating.
- Wear nitrile gloves while applying the coating.
- Wear respiratory protection, such as a mouth mask.
- Always consult the documentation provided first.
Features Kenotek COAT IT - Flexo - 50ml:
- 7H hardness
- Non-adhesive effect
- Excellent water repellency
- Smooth surface to minimize micro-scratches
- Improved resistance to water stains
- Lifespan of 18 months
Please note the following general instructions:
- Polishing should be done only with the necessary experience and with correct equipment.
- Coating placement should be done only with the necessary experience and with correct equipment.
- If explanations are needed consult our help.
- Always test the product in an inconspicuous location first to verify compatibility.
- Before use, verify that the product is suitable for your specific application.
- This product information is for non-binding advice only.
- No liabilities can arise from this.
Additional information
Brand | KENOTEK |
---|