Description

CRIJNS - Magical Transparent - Foam Lance:

CRIJNS - Magical Transparent - Foam Lance offers powerful cleaning with a local snowstorm effect for your car. The thick foam penetrates deep into the dirt, facilitates cleaning and rinses away easily. The filling bottle has a convenient large opening, stands stably and is easy to fill with your favorite snow foam. Adjust the foam thickness with the knob at the top and distribute the foam evenly with the adjustable spray jet at the front. Make cleaning your car not only more thorough, but also more fun with the Crijns Magical Transparent Foam Lance - a must-have foam gun for car enthusiasts who strive to thoroughly clean and protect their vehicle.

How do I use CRIJNS - Magical Transparent - Foam Lance?

1. Mount the selected coupling on the foam gun.
2. You can use the PTFE tape provided for this purpose to create a good seal.
3. Fill the mixing bottle of the foam lance with your favorite snowfoam and fill the rest of the bottle with warm water.
4. Mount the foam lance and put the pressure washer on.
5. Foam the car from bottom to top.
6. Adjust the spray as desired, both vertically and horizontally, with the front dial.
7. Adjust the foam thickness by adding more or less air through the upper regulator.

Warnings:

• Best used with high-pressure cleaners of 130 bar or stronger, such as Kärcher's K4/K5/K7 series.
• On K2 Kärcher pressure washers, foam may be thinner.
• Use with appropriate pressure washer for desired foam consistency.
• Enjoy easy foam cleaning for your vehicle.

Features CRIJNS - Magical Transparent - Foam Lance:

• Generates thick foam.
• Stable filling bottle with large opening for easy filling.
• Adjust foam thickness with top knob.
• Distribute evenly with adjustable spray jet.
• Thorough and fun cleaning for car enthusiasts.
• Bottle capacity : 1L (34oz)
• Bottle color : Transparent
• Pressure range : 1000 psi (70 bar) - 4000 psi (275 bar)
• Maximum Temperature : 60°C / 140°F
• Maximum Water Supply : 20L per minute
• Material : PE, Brass, Stainless steel
• Application : Foam
• Nozzle : 1.25mm
• Size : 45x43x26cm

Please note the following general instructions:

• Check that the surface is cool.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information