Description

Diamond Protech - Diamond Leather Kit:

Diamond Protech, a Swiss company specializing in the development of coatings for satellites in space, has successfully transferred its extensive knowledge and experience to the automotive industry.

This resulted in the creation of Diamond Leather, With proper preparation, Diamond Leather provides up to 12 months of protection.

What makes these coatings special is that they require no curing time and are ready for exposure to the weather elements as early as 30 minutes of application.

How do I use Diamond Protech - Diamond Leather Kit?

Preparation:

1. Beforehand, clean the leather with a leather cleaner such as Revive.
2. Provide a well-ventilated room with a temperature above 10°C.
3. Wear protective nitrile gloves during use.
4. Avoid application in direct sunlight.
5. Degrease the leather with Diamond Body Prep so that the surface is free of oils, silicones, conditioners and dressings.
6. Make sure the surfaces are dry and clean.

Application:

1. Shake the product vigorously for 15 seconds before use with the built-in shake beads (making noise is normal).
2. Apply 15 drops of the product to the applicator provided or use the Speed Applicator.
3. Spread the coating evenly over the surface, working one section at a time.
4. Start with the seat area and then do the back area.
5. Repeat the previous step on the entire interior.
6. Adhesion begins immediately upon contact, but remove excess product only within 1-3 minutes with a light swipe of a microfiber cloth.
7. Check thoroughly all coated sections after application and level if necessary with a microfiber cloth.
8. After application, leave the coating untouched for 30 minutes to cure completely.

Warnings:

• IMPORTANT: Diamond Protech products are specifically formulated to be used only in conjunction with the brand's degreaser.
• Using this coating on white stitching can result in a shift to a grayer color.
• Apply the coating only in an enclosed area at a temperature between 10 and 30°C, with humidity not exceeding 70%
• Avoid application in direct sunlight or on warm surfaces.
• Use applicators once and throw them away after use.
• Do not reuse the microfiber cloths you used to remove the coating.
• Wear nitrile gloves while applying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

Features Diamond Protech - Diamond Leather Kit:

• Diamond Leather: Space-tested coating developed with satellite coating expertise
• Resistant to extreme hot/cold temperatures.
• Manufactured in our own laboratory in Switzerland.
• Coating based on Perhydropolysilazane (PHPS) or Inorganic Polysilazane IOTA-PHPS
• Fast bonding
• Long-lasting leather protection
• Simple application
• No curing time; after 30 minutes the coating is ready for exposure to the weather elements.
• Preparation on clean surfaces
• Requires nitrile gloves

Contents Diamond Protech - Diamond Leather Kit:

• 1 x Diamond Leather 50ml
• 1 x Diamond Body Prep 100ml + Sprayer
• 1 x Applicator
• 1 x Microfiber towel
• 1 x Gloves

Please note the following general instructions:

• Check that the surface is cool.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information