Description

Carbon Collective Platinum Leather Coating:

Platinum Leather is specially formulated to protect both modern and vintage car leather from dirt, spills and color transfer while maintaining the original OEM finish.
This coating forms an invisible protective barrier thanks to strong chemical bonds and provides protection for up to one year.

For optimal results, we recommend pre-treating the surface with Carbon Collective Revive and Carbon Collective Interior Brush.
It is wise to apply the coating to a small test surface first before applying it fully.
After application, the coating should dry and cure for at least 8 hours before making contact with the surface.
Application of this product is recommended for professionals only.

How do I use Carbon Collective Platinum Leather Coating?

Preparation:

1. Clean the leather beforehand with Carbon Collective Revive.
2. Provide a well-ventilated room with a temperature above 5°C.
3. Wear protective nitrile gloves during use.
4. Avoid application in direct sunlight.
5. Make sure the surface is free of oils, silicones, conditioners and dressings.
6. Make sure the surfaces are dry and clean.

Application:

1. Apply 4-5 drops of the product to the applicator provided or use the Speed Applicator.
2. Spread the coating evenly over the surface, working one section at a time.
3. Start with the seat area and then do the back area.
4. Repeat the previous step on the entire interior.
5. Adhesion begins immediately upon contact, so remove excess product within 1-2 minutes with a light swipe of a microfiber cloth.
6. Check thoroughly all coated sections after application and level if necessary with a microfiber cloth.
7. After application, leave the coating untouched for 8 hours to cure completely.

Features Carbon Collective Platinum Leather Coating:

• Fast bonding
• Long-lasting leather protection
• Simple application
• Curing in 8 hours
• Preparation on clean surfaces
• Requires nitrile gloves

Please note the following general instructions:

• Check that the surface is cool.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information