Description

Gtechniq Bike Ceramic Kit:

Discover the power of Gtechniq Bike Ceramic, designed to repel brake dust, dirt and mud. With 24 months of protection and a chemically adhesive coating on all surfaces, makes cleaning effortless. The pH2 - pH12 resistant ceramic coating provides long-lasting and easy protection for your bike. Choose easy maintenance and maximum shine with Bike Ceramic.

How do I use Gtechniq Bike Ceramic Kit?

Step 1: Preparation

• Make sure your bike is clean and dry.
• Polishing the surface beforehand ensures better adhesion.
• Avoid direct sunlight and high temperatures during application.
• Wear the nitrile gloves provided.
• Degrease the bike and all components with Bike Frame Prep (100 ml) along with the gray MF1 microfiber cloth.

Step 2: Application

• Apply a small amount of Bike Ceramic (15 ml) to the white ultra soft foam applicator.
• Spread the coating evenly over a small area of the bicycle frame.

Step 3: Curing

• Allow the coating to cure for 1-2 minutes and then rub on.

Step 4: Remove excess product

• Use several new microfiber cloths to remove excess coating.

Step 5: Repeat procedure

• Repeat this procedure until the entire bike is completely coated and discard all used applicator and coating cloths.
• Coated cloths crystallize over time and may cause damage when reused. Despite immediate washing, we recommend throwing them away in the trash.

Step 6: Prevent moisture

• Avoid contact with water during the curing time, usually for the first 12-24 hours.

Step 7: Maintenance

• Enjoy long-lasting protection.
• Maintenance with the Gtechniq Bike product line is recommended for optimal results.

Features Gtechniq Bike Ceramic Kit:

• Up to 24 months of protection
• Repels brake dust, dirt and mud
• Easy to apply
• Chemically adhesive ceramic coating
• Suitable for various finishes
• Easy to clean
• pH2 - pH12 resistant
• Long-lasting shine
• Recommended maintenance with Gtechniq Bike line.

Contents Gtechniq Bike Ceramic Kit:

• 15 ml bottle of Bike Ceramic.
• 100 ml Frame Prep.
• Ultra soft foam-filled applicator pad.
• MF1 Microfiber polishing cloth.
• Set of powder- and latex-free gloves.

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information