Description

Menzerna Medium Cut MC2200:

Menzerna Medium Cut Polish MC2200 is a highly efficient polish for both newer and older paint types. With a power higher than previous polishes, it also delivers a better shine. When combined with the right polishing pad, even sanding marks can be removed. Worldwide, this renowned polish is considered indispensable in detail areas. Its high correction combined with a fine finish makes it an ideal polish. Recent modifications to both the formula and labeling make it work even better and faster on all paint varieties. It can be used with either a rotary or an excenter.

How do I use Menzerna Medium Cut MC2200?

1. Check the size: Select the correct diameter of the pad that corresponds to your polisher and attach it to the polishing wheel.
2. Polishing application: apply Medium Cut 2200 to the Yellow Menzerna Polishing Pad.
   Make sure the polishing compound is evenly distributed over the surface of the pad.
3. Polish: Place the pad on the surface to be polished and turn on the polisher. Work in overlapping motions and apply enough pressure to achieve the desired results.
4. Check the progress: Check regularly to see if the desired defects have been removed and the paint is in good condition.
5. Inspection: Check the result and remove any excess product with a soft polishing cloth. Also, make sure you have correct lighting during the inspection.
6. Finishing: Remove polishing residue and, if necessary, protect the surface with a wax or ceramic coating.

Warnings:

• We recommend performing multiple polishing steps to achieve the desired finish before applying a wax or ceramic coating.
• When using rotary polishers, it is important to pay close attention to the heat build-up on the surface. If you do a lot of correction work in a specific place, it is wise to take regular breaks to allow the panel to cool down.

Features Menzerna Medium Cut MC2200:

• Efficient polish for all paint types
• Powerful with improved gloss
• Removes sanding marks
• World renowned in detail spaces
• Suitable for both rotary and excenter
• Recently improved for faster and better results on all paint types

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information