Description

Menzerna Super Heavy Cut Compound 300:

Menzerna Super Heavy Cut Compound is the ultimate polishing paste, with 25% more correction power than FG400. Thanks to fine alumina, it effectively removes abrasions, scratches and swirls on even the hardest paints. With minimal dust production and the ability to go straight to finishing, this silicone and filler-free polish makes the polishing process efficient and enjoyable. A powerful choice for maximum cutting power and a fast, impressive shine.

How do I use Menzerna Super Heavy Cut Compound 300?

1. Check the size: Select the correct diameter of the pad that corresponds to your polisher and attach it to the polishing wheel.
2. Polishing Application: Apply Cut Force Pro to the Red Menzerna Polishing Pad.
   Make sure the polish is evenly distributed over the surface of the pad.
3. Polish: Place the pad on the surface to be polished and turn on the polisher. Work in overlapping motions and apply enough pressure to achieve the desired results.
4. Check the progress: Check regularly to see if the desired defects have been removed and the paint is in good condition.
5. Inspection: Check the result and remove any excess product with a soft polishing cloth. Also, make sure you have correct lighting during the inspection.
6. Finishing: Remove polishing residue and, if necessary, protect the surface with a wax or ceramic coating.

Warnings:

• We recommend performing multiple polishing steps to achieve the desired finish before applying a wax or ceramic coating.
• When using rotary polishers, it is important to pay close attention to the heat build-up on the surface. If you do a lot of correction work in a specific place, it is wise to take regular breaks to allow the panel to cool down.

Features Menzerna Super Heavy Cut Compound 300:

• 25% more correction power than FG400
• Removes scuffs and scratches
• Fine alumina
• Minimal fabric
• Directly to finishing
• Silicone- and filler-free
• Maximum wear and tear
• Quick shine

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information