Description

PURE:EST - C2 - Clay Lubricant - 500ml:

PURE:EST, with the Clay Bar and Clay Bar Lubricant, has the perfect compromise for effectively removing stuck-on dirt without the risk of marring. There are other clay bars that are either too mild to remove real dirt, or too aggressive and risk light scratching on sensitive paints, which then requires machine polishing.
The Clay Bar is designed to provide the right middle ground. It is not too soft and, with proper caution, leaves no traces of marring. For optimal smoothness and handling, it is recommended that the Clay Bar be used in conjunction with the Clay Lubricant.

How do I use PURE:EST - C2 - Clay Lubricant - 500ml?

1. If necessary, you can first perform a chemical cleaning with W1 Wheel Cleaner and T3 Tar & Glue Remover to remove stubborn contaminants.
2. Make sure the surface to be treated has been thoroughly washed with S3 pH Neutral Shampoo and is clean.
3. Take a palm-sized piece of the Clay Bar (about 1/4 of the clay bar).
4. Use C2 Clay Spray as a lubricant to treat the surface. Spray a small amount on the surface before using the clay bar.
5. Move the clay bar across the surface without too much pressure.
6. Hold the clay bar parallel to the surface and make light, smooth movements.
7. Work in sections and be sure to treat the entire surface.
8. The clay bar will collect dirt particles and may become contaminated over time. Fold or knead the clay regularly to expose clean parts.
9. Continue to treat the surface until it feels smooth and clean.
   After you are done, polish the cleaned paint with a fine polishing paste if needed for further beautification.
10. To prevent the clay from drying out, moisten it after use with C2 Clay Spray and store it in the box provided.

Features PURE:EST - C2 - Clay Lubricant - 500ml:

• Improves lubrication for clay
• Manufactured in Sweden to the highest standards.
• Contains no VOCs (solvents) and PFAS (highly fluorinated substances).
• Reduces friction and minimizes chance of scratches
• Creates a smooth, non-adhesive surface
• Contains wetting agents and lubricants
• Designed for use with clay bars

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information