Description

Diamond Protech - Diamond Wrap, PPF & Vinyl Kit:

Diamond Protech, a Swiss company specializing in the development of coatings for satellites in space, has successfully transferred its extensive knowledge and experience to the automotive industry.

This resulted in the creation of Diamond Wrap, With proper preparation, Diamond Wrap provides up to 18 months of protection.

What makes these coatings special is that they require no curing time and are ready for exposure to the weather elements just 1 hour after application.

How do I use Diamond Protech - Diamond Wrap, PPF & Vinyl Kit?

1. Before applying the coating, degrease the car twice with Diamond Body Prep, so that the pores are cleaned and the coating can adhere properly.
2. Shake the product vigorously for 15 seconds before use with the built-in shake beads (making noise is normal).
3. Wear nitrile gloves and a ventilation mask.
4. Moisten the coating applicator with 15 drops.
5. Apply in overlapping horizontal and vertical strokes, up to 30 x 30 cm at a time.
6. If necessary, re-moisten the applicator with a few drops of coating.
7. Allow it to evaporate(flash) for up to 1-3 minutes; remove excess product within this time.
8. Remove excess product with 3-4 coating cloths and rub thoroughly for proper application.
9. When applying a second coat, use a new coating applicator and 3-4 new cloths.
10. For a guaranteed lifespan of 5 years, we recommend applying a second application coat.
11. Simply follow the same steps as described earlier.
12. When the application is complete check carefully with an inspection lamp to work out any highspots.
13. Allow the coating to cure for 1 hour or speed up the process with an infrared lamp for 10 minutes before exposing it to the elements.
14. After application, leave the car untouched in terms of physical cleaning for the next 2 weeks so that the coating has sufficient time to fully cure.
15. Apply Diamond Protech Quick Body to every three washes to preserve the coating and extend its life.

Warnings:

• IMPORTANT: Diamond Protech products are specifically formulated to be used only in conjunction with the brand's degreaser.
• Apply the coating only in an enclosed area at a temperature between 10 and 30°C, with humidity not exceeding 70%
• Avoid application in direct sunlight or on warm surfaces.
• Use applicators once and throw them away after use.
• Do not reuse the microfiber cloths you used to remove the coating.
• Wear nitrile gloves while applying the coating.
• Wear respiratory protection, such as a mouth mask.
• Always consult the documentation provided first.

Features Diamond Protech - Diamond Wrap, PPF & Vinyl Kit:

• Diamond Wrap, PPF & Vinyl: Space-tested coating developed with satellite coating expertise
• Resistant to extreme hot/cold temperatures.
• Manufactured in our own laboratory in Switzerland.
• Coating based on Perhydropolysilazane (PHPS) or Inorganic Polysilazane IOTA-PHPS
• No curing time; after one hour the coating is ready for exposure to the weather elements.
• 18 months of hydrophobic protection
• Effortless, single-layer application
• Diamond hard scratch resistance
• Flexible and self-healing: For expanding surfaces.
• No gloss change: Retains matte, satin or flat finish.
• 30-50ml

Contents Diamond Protech - Diamond Wrap, PPF & Vinyl Kit:

• 1 x Diamond Wrap 30ml
• 1 x Diamond Body Prep 100ml + Sprayer
• 1 x Applicator
• 1 x Microfiber towel
• 1 x Gloves

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• Coating placement should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information