Description

Koch Chemie Heavy Quick Cut B9.01:

Koch Chemistry B9.01: Removes heavy scratches, paint mist and sanding scratches from 1200 grit upwards. Use with Heavy Cut Pads and polisher for perfection. High pressure, low speed for even paste distribution, high gloss finish. Microfiber cloth for residue. Choose H9.01 for professional scratch removal and shine.

• For black scratches, we recommend the use of Koch Chemie Heavy Cut recommended.
• For less severe scratches, we recommend the use of Koch Chemie Fine Cut recommended.
• For superficial scratches or swirls, we recommend the use of Koch Chemie Micro Cut recommended.

How do I use Koch Chemie Heavy Quick Cut B9.01?

For best results, we recommend using the Koch Chemie Heavy Cut Pads be used in conjunction with an eccentric polisher, such as the Rupes LHR15. If you want to remove sanding scratches from P1500 to P2500, consider using a rotary polisher such as the Rupes LH19E, possibly in combination with a lambswool pad.

• Preparation: Ensure a clean surface by claying the surface if necessary clay.
• WARNING: Shake the polish before use.
• Application: Apply the polish to the pad with four small dots, top, bottom, left and right.
• Polishing: Dab the pad on the panel, start the machine and gradually increase the speed.
• RPM: Increase the RPM and move from left to right and top to bottom on a 30 by 30 cm panel.
• Inspection: Check the result and remove any excess product with a soft polishing cloth. Also ensure correct lighting during inspection.
• Finish: remove polish residue and, if necessary, protect the surface with a wax or paint sealer.

Warnings:

• We recommend performing multiple polishing steps to achieve the desired finish before applying a wax or ceramic coating.
• When using rotary polishers, it is important to pay close attention to the heat build-up on the surface. If you do a lot of correction work in a specific place, it is wise to take regular breaks to allow the panel to cool down.

Features Koch Chemie Heavy Quick Cut B9.01:

• Excellent cutting performance for removing heavy scratches, sanding scratches and paint mist of 1200-grit and above.
• Minimizes dust generation for a cleaner work environment.
• Delivers a high-gloss finish in addition to removing imperfections.

Please note the following general instructions:

• Polishing should be done only with the necessary experience and with correct equipment.
• If explanations are needed consult our help.
• Always test the product in an inconspicuous location first to verify compatibility.
• Before use, verify that the product is suitable for your specific application.
• This product information is for non-binding advice only.
• No liabilities can arise from this.

Additional information